Home Decorators Collection SARINA CF1004B Guide D'utilisation Et D'entretien page 7

Assembly - Hanging the Fan
1
Install the mounting bracket to
ceiling
WARNING: To reduce the risk of re, electric shock, or other
personal injury, mount the fan only to an outlet box or supporting
system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
□
Align 2 Screw (BB/LL) through Washer (CC/KK) and Washer-
D15 (DD), then install 2 screw assemblies through 2 centered
holes of mounting bracket (A) onto the outlet box. Figure 1.
□
Tighten the mounting screw assemblies to secure the
mounting bracket (A) to the ceiling.
DD
CC/KK
BB/LL
Figure 1
2
□
□
□
□
B
Outlet Box
A
C
B
7
Prepare the down-rod assembly
Remove the hitch pin (I) and lock pin (J) from the bottom of
hanger rod (B). Figure 1.
Put the canopy (C) and coupling cover (D) over the hanger
rod (B). Figure 2.
Align two holes at the bottom of hanger rod (B) with two holes
on the coupling cover (D) to reinstall the hitch pin (I) and lock
pin (J) back to pre-lock the down-rod assembly. Figure3.
Insert combination screw (AA) into the hole beside hitch pin (I)
and lock pin (J), tighten the screw to secure the coupling cover
(D) to the hanger rod (B).
B
Figure 1
D
B
C
Figure 2
Figure 3
Please contact 1-800-986-3460 for further assistance.
AA
HOMEDEPOT.CA