AC Infinity AC-TWT8 Manuel D'utilisation page 26

PROGRAMMING
°F/°C SETTING
Changes the displayed units to Fahrenheit
or Celsius. Press the up or down button to
cycle through F and C. All displayed units will
automatically convert when adjusting this setting.
CALIBRATION TEMPERATURE SETTING
Adjusts the temperature reading the sensor
probe is measuring. Press the up or down button
to increase or decrease the data figure in 2°F (or
1°C) increments. The calibration cycle ranges
from -20°F to 20°F (or -10°C to 10°C) and will be
applied to the sensor probe's measurements.
26