Bosch DCU 100 Consignes D'utilisation page 22

en 22 | DCU 100 | Maintenance
6. Maintenance
6.1 Cleaning
6.1.1 DCU 100
Only use a soft cloth and neutral detergents to clean
the housing and display of the DCU 100. Do not use
abrasive cleaning agents and coarse workshop cloths.
6.1.2 Data carrier
Clean the CD-ROM or DVD-ROM with a disk cleaning kit
or carefully wipe over the silver side of the disk with a
soft, lint-free cotton cloth. Never use paper towels, as
these could cause scratches.
6.1.3 DVD drive
Clean the DVD drive at regular intervals with a cleaning
disk for the CD-ROM or DVD drive. The appropriate
cleaning disks are available from most computer or
entertainment electronics shops.
6.2 Battery replacement
WARNING - Risk of explosion on charging
battery!
Risk of explosion and hence burns and injury
in the event of inexpert charging of the
battery.
¶
Only use the battery specified for the
DCU 100.
¶
Only use the power supply unit specified
for the DCU 100.
¶
Heed the notes on disposal.
¶
Batteries are not to be heated, burnt,
short-circuited, mechanically damaged or
charged with excessively high currents or
reverse polarity.
¶
Suitable extinguishing agents: Water, CO
sand.
1. Switch off the DCU 100.
2. Slacken off the battery screws on the back of the
DCU 100 (see Fig. 3, Pos. 3).
3. Remove the battery.
4. Insert the new battery in the battery compartment
and secure by means of the two screws on the bat-
tery (see Fig. 3, Pos. 3).
5. Switch on the DCU 100.
i
The battery charge indicator can be called up using
the icon.
"
The battery charge indicator shows the current battery
charge on a scale of 0 to 100 %.
i
It is advisable to charge the battery for at least three
hours before running the DCU 100 off the battery.
|
1 689 989 174 2015-03-25
All manuals and user guides at all-guides.com
6.3
!
1. Connect the DCU 100 to the power supply unit.
2. Switch on the DCU 100.
3. Connect the external DVD drive to the DCU 100 by
4. Insert the recovery DVD 1 687 005 082 in the DVD
5. Re-start Windows with "START >> RE-START".
6. Confirm the dialog window "
7. Take the recovery DVD out of the DVD drive.
8. Remove the external DVD drive.
9. Confirm with <OK>.
"
i
6.4
,
2
Designation
DCU 100 tablet PC (green)
DCU 100 tablet PC (anthracite)
Battery
External DVD-ROM drive
Power supply unit
Power cord
Touch pen (3x)
<)
Recovery process
All data and applications on the hard disk will be
erased during the recovery process!
way of the USB connecting cable (0.6 m).
drive.
 Windows is started.
want to recover your System? WARNING!
ALL DATA ON HARD DISK DRIVE C: WILL BE
LOST. Please be patient while recovery
process is running.
 DCU 100 recovery is started – duration approx.
25 minutes.
 Windows is re-started on completion of recovery
 The dialog window " Please remove the re-
covery media from the device and
click "OK" to reboot the computer
appears.
This completes the recovery process.
Then re-install ESI[tronic] 2.0.
Spare and wearing parts
<)
Wearing part
Would you really
" with <Yes>.
"
Order number
1 687 023 687
1 687 023 688
1 687 335 042
1 687 023 698
1 687 023 697
1 684 461 186
1 687 010 403
Robert Bosch GmbH