Publicité
Les langues disponibles
Les langues disponibles
-
Never use several extension cords.
-
In case the device displays any unusual characteristics (e.g. strange smell or smoke),
immediately stop operating the device and remove the mains power plug from the wall
socket.
sETTING UP ThE fILE shrEDDEr
1. The centre of gravity is located in the top part of the device. Make sure to position the file
shredder on an even surface to prevent it from toppling over.
2. Never operate the device near sources of heat or cold, or in an overheated, moist or dusty
environment.
3. Place the device close to a wall socket and ensure easy access to the wall socket, in case
the device needs to be deactivated.
4. Insert the inner waste receptacle (for CDs/DVDs) into the waste paper container first.
5. Make sure that the waste paper container is pushed all the way into the device.
6. Connect the mains power plug to a regular 220-240 V AC wall socket.
sTrUcTUrE aND fUNcTIoN
1 CD/ Credit card slot
2 Button: Forward operation (FWD)
3 Button: Reversed operation (REV)
4 Display 'Power'
5 Display 'Economy'
6 Display 'Status'
7 Viewing window
8 Waste paper container
9 Rollers
commIssIoNING ThE fILE shrEDDEr
a. feeding Paper into the Device
The device can shred a maximum of 7 sheets (A4, 70 g/m²) simultaneously. Switch on the file
shredder by pressing the power button on the rear of the device. Two green LEDs, 'Power'
and 'Status', light up.
The shredder automatically detects paper in the feeder and the device activates. If you have
fed only a small amount of paper into the device (approx. 1-3 sheets A4, 70 g/m²), the shred-
der will operate in 'Economy' mode. The operating mode is displayed by the lit up green
10
Publicité
