Télécharger Imprimer la page

WIK 9711 Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

08_Innenseiten_Sprachen
GB
Appliance specifications
CAFFÈ ESPRESS
Name:
Model no.:
Voltage:
Rated input:
Heating system: Stainless steel element
Filling level:
Mains cable:
Dimensions:
Max. permissible pressure: 4.0 bar
Protective type: I
Interference suppression: this appliance
has been interference-suppressed in accor-
dance with the interference suppression
directives.
Electromagnetic compatibility: this appli-
ance has been suppressed in accordance
with the EMC (electromagnetic compatibili-
ty) directives.
Parts of the appliance
a Stainless steel lid
b Lid opener
c Handle
d Stainless steel pot
e Filter disc
f
Seal
g Coffee filter with sieve
h Safety valve
i
Stainless steel water container
j
ON-/OFF switch with red heat indicator
lamp
k Power base with cable storage
compartment
22.06.2006
15:02 Uhr
All manuals and user guides at all-guides.com
Espresso percolator -
cordless, with power
base
9711
220 - 240 V ~ / 50 - 60 Hz
335 - 400 W
0.3 litre or 6 cups
max. 90 cm
Height:
235 mm
Diameter:
120 mm
Seite 11
For your safety!
The Instructions for Use contain important
notes on safety and the information requi-
red for proper operation of the appliance!
Read the instructions in full, keep them in
a safe place and pass them on to any sub-
sequent owner.
All safety instructions are always intended
for your own safety!
Safety instructions when connecting the
appliance
This appliance complies with the recog-
nized rules of technology and the pertinent
safety regulations for electrical appliances!
To avoid damage or danger by improper
use, the instructions for use should be
carefully kept and followed!
If you give the appliance to another per-
son then you should also supply them
with the instructions for use!
If the connecting cable of this appliance
becomes damaged, have it replaced only
by a repair workshop nominated by the
manufacturer, to prevent any danger! In
such cases, please contact the manufac-
turer or the manufacturer's customer
service department!
The voltage of the power source must be
the same as specified on the ratingplate!
Connect the appliance only to AC current
and to a socket with earthing contact. Do
not pull the cable over sharp edges, clamp
it into place or allow it to hang down. Keep
the cable away from heat and dampness!
Connect the main plug to the socket
before placing the appliance on the
power base.
The appliance is only to be used with
the stand provided.
Never place the appliance on or beside
hot surfaces, for example, radiators,
cooking rings, gas burners or similar.
11

Publicité

loading

Produits Connexes pour WIK 9711