Technics SA-C100 Manuel D'utilisation Fonctions De Base page 16

Playing back CDs
1 Press [ ] to turn this unit on.
2 Press [CD].
3 Open the top cover with a sliding
motion and then insert the CD.
• The top cover can slide to the both sides.
• Place the CD with its label facing up, and
push the center of the CD until a clicking
sound is heard.
4 Close the top cover with a sliding
motion.
• This unit cannot play back the CD while the
top cover is open.
5 Press [ ].
■
To eject the CD
Open the top cover with a sliding motion.
Eject the CD.
• Be careful not to hit the CD with the top
cover.
• Eject the CD after the CD has stopped
turning.
Note
• Be careful not to get your finger caught in the
top cover when opening/closing it.
• Be careful not to touch the lens with your
fingers.
• The lens lights when the following operations
are performed with no CD inserted. This is not
a malfunction.
- When turning the power on
16
(16)
Lens
- When selecting "CD" as the input source
- When opening and closing the top cover
■
Repeat Playback/Random repeat playback
Press [MENU].
Press [ ], [ ] repeatedly to select
"Repeat"/"Random" and then press [OK].
Press [ ], [ ] repeatedly to an item and then
press [OK].
• During random playback, you cannot skip to
the previous track.
■
Program playback
Press [PGM] in the stop mode.
• "Program Mode" screen is displayed.
Press the numeric buttons to select tracks.
• Repeat this step to make further selections.
Press [
• Press [ ] or [ ] in the stop mode to check the
programmed order.
• Press [CLEAR] in the stop mode to clear the last
track.
• Press [PGM] in the stop mode to cancel the
program mode, and the program memory will
be stored.
• Press [
to cancel the program mode. (The program
memory will be cleared.)
Note
• The program memory is cleared when
replacing the CD.
• The program mode is cancelled when the
random repeat playback is set.
] to start playback.
] in the stop mode and select "Yes"