Technics SA-C100 Manuel D'utilisation Fonctions De Base page 12

Connections
(Continued)
DO NOT
• Wire the polarity (+/-) of the terminals correctly.
Not doing so may adversely affect stereo
effects or cause malfunction.
• For details, refer to the operating instructions
of the speakers.
12
(12)
AC power supply cord
connection
Connect only after all other connections are
completed.
To a household AC outlet
• Use only the supplied AC power supply cord.
• Insert the plugs of the cables to be connected
all the way in.
• Do not bend cables at sharp angles.
• Wireless LAN (Wi-Fi
® ) setting may start when
this unit is turned on. If you stop the Wi-Fi
setting, select "No" in "Wi-Fi Setup" screen.
Select "Yes" to keep the Wi-Fi setting. ( 14)
Note
• This unit consumes a small amount of AC
power ( 20) even when the unit is in standby
mode. Remove the plug from the main
electrical outlet if you will not be using the unit
for an extended period of time. Place the unit
so the plug can be easily removed.
AC IN terminal