Technics SA-C100 Manuel D'utilisation Fonctions De Base page 11

FM antenna connection
FM ANT terminal
Insert the antenna plug to
be connected all the way in.
FM indoor antenna (supplied)
• Tape the antenna to a wall or column at the
position with the least amount of interference.
• The interference may occur if any electronic
devices are nearby.
Analog audio output device
connection
When connecting a turntable, connect the
PHONO cable (not supplied) to PHONO terminals
and the PHONO earth lead to the PHONO
EARTH terminal of this unit.
When connecting an analog audio output device
such as Blu-ray Disc player, connect the analog
audio cable (not supplied) to LINE IN terminals.
Analog audio output device
(Turntable, Blu-ray Disc
player, etc.)
• Press [>SELECT<] repeatedly to select "PHONO"
or "LINE" to play back. (Turn the volume down
before switching the input.)
• Do not connect an analog audio output device
such as Blu-ray Disc player to PHONO terminals.
Adhesive tape
(not supplied)
Speaker connection
Speaker cable
(not supplied)
1 Turn the knobs to loosen them, and
insert the core wires into the holes.
2 Tighten the knobs.
Note
• When the connections are completed, pull the
speaker cables lightly to check that they are
connected firmly.
• Be careful not to cross (short-circuit) or reverse
the polarity of the speaker wires as doing so
may damage the amplifier.
Connections
Speaker cable
(not supplied)
11
(11)