Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE AND CLEANING
•
Cleaning the dustbin and high performance filter
1.
Turn off the machine, open the top panel and take out the dustbin.
2.
Open the dustbin cover, take out the filter, empty the dustbin.
3.
Use wet cloth to clean or clean water to flush the dustbin and filter, then let the
dustbin and filter air dry.
Attention: Do not dry the dustbin and the filter under direct sunlight, since it will
cause color change and embrittlement. Keep the transparent dust backstop well in
position to avoid missing or damage.
4.
Assemble back the dustbin: Put the filter in the circle of the dustbin, make
sure the face with letters "UPSIDE" is at the top, ensure the transparent dust
backstop touch the slanting surface of the dustbin, then close the dustbin cover.
•
Cleaning the side brushes
1.
Hold the base of the side brush and pull it outward.
2.
Clean the side brushes with wet cloth or flush it with clean water. If the side
brushes are entangled with long hair or similar long fiber, please first cut the hair
or fiber into small pieces by scissors and then cautiously get rid of them. Please
do not pull the long hair or fiber hard directly, otherwise it may lead to pulling out
the bristles.
3.
Let the side brushes air dry and then put it back in position.
4.
In case of curved bristle of side brushes, put the side brushes into a hot water of
about 80°C for 15 seconds, the bristle will become straight, then air dry and put
the brush back in position. Please do not put the side brush in hot water for too
long to avoid deformation of the plastic parts.
Remarks: Side brushes are comsumables, if the bristles are lost or broken a lot after
a long period of use, please replace the brushes with new ones.
•
Cleaning the driving wheels and the universal wheel
Please clean the wheels each time after use to get rid of dirts or hairs.
•
Cleaning the infra-red sensors
Each time before using the machine, please clean the surface of the 3 infra-red
sensors at the bottom of the machine using dry cloth so that the sensibility of the
infra-red sensors will not be decreased by the dust.
7
EN
Publicité
