ADJ NET 8 Mode D'emploi page 10

I N S TA L L AT I O N I N S T R U C T I O N S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
USE CAUTION WHEN POWER LINKING OTHER MODEL DEVICES AS THE POWER
CONSUMPTION OF OTHER MODEL DEVICES MAY EXCEED THE MAXIMUM POWER
OUTPUT OF THIS DEVICE. CHECK SILK SCREEN FOR MAXIMUM AMPS.
THE NET 8 IS DESIGNED TO BE RACK-MOUNTED; HOWEVER, IT CAN BE USED
STAND-ALONE, WHERE THE DEVICE MUST SIT ON A FIRM FLAT SURFACE.
Device MUST be installed following all local, national, and country commercial electrical and construction
codes and regulations.
POWER LINKING
USE CAUTION WHEN POWER LINKING AS THE POWER CONSUMPTION MAY
EXCEED THE MAXIMUM POWER OUTPUT ON THIS DEVICE. CHECK SILK SCREEN
FOR MAXIMUM AMPS.
RACK MOUNT INSTALLATION
1. Align the mounting holes of the NET 8 with the corresponding holes on the rack, making sure to
position the device at the desired height.
2. Insert (4x) screws through the mounting holes of the NET 8 and securely tighten them.
3. Ensure that the device is firmly attached to the rack before connecting any cables.
10