Sunny Health & Fitness SF-RB4616S Manuel D'utilisation page 5

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#66 S13-15-17
#58 M8*65
#54 φ20 *1.5
#53 M8
#67 S6
#54 φ20 *1.5
#59 M8*15
70
69
23a
23a
23a 23a
38
38
38
38
ASSEMBLY INSTRUCTIONS
1PC
4PCS
4PCS
4PCS
1PC
4PCS
4PCS
54
59
59
54
59
54
70
23a
38
69
1
STEP 1:
NOTE：The Front Stabilizer (No. 6F) is
marked "FRONT" and the Rear Stabilizer
(No. 6R) is marked "REAR"
Attach the Front & Rear Stabilizers (No. 6F
& No. 6R) onto the Main Frame (No. 1) with
4 Cross Head Bolts (No. 58), 4 Arc
Washers (No. 54), and 4 Cap Nuts (No.
53). Tighten with the Spanner (No. 66).
STEP 2:
Connect the Sensor Wire 2 (No. 70) with
Sensor Wire 1 (No. 69).
CAUTION: Please make sure the Tension
Control Knob (No. 23) is at the highest
23
2
resistance level (level 8, all the way to the
right) before you connect the Tension Wire
(No. 38).
Connect Tension Control Wire (No. 23a)
and Tension Wire (No. 38). Then, pull
Tension Control Wire (No. 23a) upward and
insert it into the slot of metal bracket on
Tension Wire (No. 38). Make sure the metal
fitting on Tension Control Wire (No. 23a) is
secured in the metal bracket.
Attach the Front Post (No. 2) onto the Main
Frame (No. 1) using with 4 Hexagon Bolts
(No. 59) and 4 Arc Washers (No. 54).
Tighten and secure with the Allen Wrench
(No. 67).
4