PROBLEM
There is no display on the
computer console.
The recumbent bike
wobbles when in use.
The recumbent bike
makes squeaking noise
when in use.
TROUBLESHOOTING
1. Remove the computer and verify that the wire from the computer
is properly connected to the wire that comes from the front post.
2. Check if the batteries are correctly positioned and battery
springs are in proper contact with batteries.
3. The batteries in the computer may be unresponsive. Change to
new batteries.
Turn the end caps on the rear stabilizer as needed to level the
recumbent bike.
The bolts may have become loose on the recumbent bike. Please
inspect all the bolts and tighten any loose bolts.
10
SOLUTION