Silverline 802092 Instructions D'utilisation page 12

GB
Troubleshooting
Problem
Router will not operate
Router runs or cuts slowly
Excessive vibration
12
Cause
No power
Router mains plug not connected to Switchbox socket
Router on/off switch not on or Router Trigger Clamp not fitted
Router incorrectly setup
Router faulty
Switchbox will not stay on
Switchbox will not stay on
Wattage of router is too low for use with router table
Router incorrectly mounted
Router table not bench mounted or not secured to surface
with clamps
Router too powerful for table
Solution
Check the Switchbox (5) is connected to a live mains connection
Connect router mains plug to Switchbox
Ensure router on/off switch is locked or clamped in on position
Follow information in router manual
Get router repaired or replace
Wattage of router too high. See Specification
See router manual
See Specification
Secure router to table correctly
Secure router table correctly. See 'Bench Mounting'
See Specification and fit a compatible router to table