Seko PoolDose pH ORP Manuel D'instructions page 7

PoolDose | pH · ORP · Chlorine
5. SETTING PROGRAM
1 2
Program Setup – Press
At the entry of each menu item, the parameter can be directly modified using the arrow keys (
Confirmation of the current setting and switching to the next item is done by pressing the
The menu has a circular structure: once you arrive at last item, the confirmation of the parameter set by pressing
, determines the return to the first menu item.
– It is possible to select between 5 available languages: EN, FR, IT, DE, ES
1
2
▪
▪
▪
* Timed dosing only
▪
▪
▪
3
▪
▪
▪
* Timed dosing only
▪
▪
▪
4
▪
▪
▪
* Timed dosing only
▪
▪
5
▪
▪
▪
▪
0000138994
3 4 5
for 5 seconds
– 7.4pH (6-8pH)
– Acid (Acid/Alka)
= 30seconds (range from 1 to 360 seconds)
= 60seconds (range from 1 to 360 seconds)
: 25°C; set °C/°F and the manual value
: Off, 1-60' (minutes)
– 700 mV (400-850mV)
Low (Low/High)
= 30seconds (range from 1 to 360 seconds)
= 60seconds (range from 1 to 360 seconds)
: Off, 1-60' (minutes)
Note: The ORP dosing, in the presence of Chlorine has no effect on the dosing pump,
but can handle the Aux2 Relay with ON/OFF activation with respect to the setpoint.
– 1.2 ppm(0.3-3.0 ppm)
Low (Low/High)
= 30seconds (range from 1 to 360 seconds)
= 60seconds (range from 1 to 360 seconds)
: Off, 1-60' (minutes)
– (Enabled/Disabled)
(Input flow rate)
•
ON-OFF
•
Pulse/Liter:1 or Liter/pulse:1 – Set value
•
Unit: L or m³
2 points, 1 point, Reference, Disable
: 1 point, Reference, Disable
rev. 3.0
1) Button to increase the value
2) Button to decrease the value
3) Button Menu/Esc
6
4) Button Cal/OK
5) Button to set the setpoint
6) Digital display
EN
and ).
button.
5