Celestron ASTROMASTER 70 AZ Guide De Démarrage Rapide

1
Your AstroMaster includes: Optical tube, StarPointer finderscope
(with CR2032 3V battery), pre-assembled tripod with center leg
brace and altazimuth mount attached, two eyepieces, erect image
diagonal, accessory tray, lens cloth and a owner's manual.
4
All three legs should be the same length to provide a level platform
for the telescope.
7
Here is how the fully assembled tripod and mount should appear.
2
To set up the tripod, spread the legs outward until they are fully
extended. Extend each of the three tripod legs down 6-12".
5
To attach the accessory tray, line up notches and turn clockwise
until tray tabs lock into place with the tripod brackets.
8
Dovetail
Mount
Fastening
Screws
Next, slide telescope tube's dovetail into the mount. Be sure to back
out fastening screws to allow enough clearance for the dovetail.
70
AZ TELESCOPE
Q U I C K S E T - U P G U I D E
#21061-CT-DS
3
Use the three tightening screws located at the bottom of each leg
to secure the extended legs in place.
6
Properly assembled, the accessory tray should appear as
pictured above.
9
Dovetail
Center dovetail in the mount and tighten fastening screw. For
added security tighten the angled lock down screw next to the
fastening screw.
ENGLISH