Lock Button; Lcd Display; Swing Button - Linea 2000 Domo DO-324A Mode D'emploi

DO-324A
7. SLEEP BUTTON
This setting can be used during the night. It will keep a comfortable sleeping tempera-
ture and will save energy. This function can be selected with the "cool" and "auto"
setting. Cancel this setting by pressing the "on/off", fan speed, sleep or mode button.
8. TIMER OFF BUTTON
Press this button if you want your airco to shut down at a certain time. You can elevate
the current time everytime you press the button . Max timer setting is 24 hours. For
canceling the auto on function you keep on pressing the "timer on" button until "0.0"
is dispayed.

9. LOCK BUTTON

When pressing this button all current settings are locked. When pressing this button,
nothing can be changed on the current setting. Press the "lock"button again if you
want to cancel the lock. When the "lock" function is set, a small key symbol will be
shown on the display.

10. LCD DISPLAY

This button will clear the display on the airco unit and will turn on the light of the
display.

11. SWING BUTTON

To adjust the air flow.
USE OF THE DIFFERENT FUNCTION BUTTONS
AUTO mode
Make sure the unit is plugged in.
Press the "mode"-button and select the "auto" mode.
Press the arrow buttons to set the temperature.
Press the "on/off" button to turn the airco on;
NOTE : when selecting the "auto" function, the airco will determine in which setting
it will work (airco – fan – dry), depending on the room temperature.
COOL/ FAN mode
Make sure the unit is plugged in.
Press the "mode" button and select desired function (cool or fan).
Press the arrow buttons to select the desired temperature.
Press the "fan speed" button to select the fan speed.
Press the "on/off" button to turn on the airco.
NOTE : when using the "fan" mode, no temperature will be displayed. The room
temperature can't be controled.
65