Automatic Restart - Linea 2000 Domo DO-324A Mode D'emploi

DO-324A
5. TIMER function
When the unit is on, you press the "timer" touch. The "timer off" indication
light will turn on. This indicates that the "auto shut off" is activated. When
pressing het "timer" touch again, the "timer on" indication light will turn on.
This indicates that the "auto on" function is activated.
Press the arrow buttons to select the time. The max time selection is 24 hours.
After finishing the selection, the time will start to countdown on the display
until "auto on" or "auto off", depending on the selection you made.
You can cancel the timer function at any time by pressing the "on/off" touch.
When the error code E1 or E2 is displayed, the timer selection will be can-
celed.
6. SLEEP function
When pressing the "sleep" touch, the selected temperature will be elevated
with 1 °C after 30 min. After another 30 min the temperature will increase
with another 1°C. The airco will maintain this temperature for 7 hours. Af-
ter this time, the airco will go back to the original set temperature and the
"sleep" function will end.
NOTE : this function can not be selected with the "fan" or "dry" function.

AUTOMATIC RESTART

When the airco will turn off unexpectely, because of a power failure, the unit will
turn back on when the power comes back on. All the settings will remain the same as
before the power failure.
NOTE : the unit can only restart after 3 min. So if the power failure is shorter than 3
min the unit will still take up to 3 min to restart.
INSTALLATION
Place the airco on a solid and stable floor, this way you will prevent excessive noice
and vibrations. Make sure that the floor is strong enough to support the weight of the
appliance.
The appliance has small wheels for easy moving. Make sure only to move the airco
over a flat and level surface. Be careful when moving the airco over carpet. Never roll
the unit over an object.
Place the unit near an earthed socket.
Never place any object within 30 cm round the airco.
60