Candy Brava CI 4E2DFB Notice D'instruction page 89

5. LOADING DISHES
Using the upper basket
The upper basket is provided with mobile

racks hooked to the sides of the basket,
which can be regulated into 4 positions.
In the lowered position (A-A1) the racks

may be used for such items as: tea and
coffee cups, kitchen knives and ladles.
Also glasses with stems may be safely
hung on the ends of the racks.
In the upright position (B-B1) the racks

allow you to load dinner plates and soup
plates up to a maximum diameter of 19
cm. Plates should be loaded vertically
with the underside of the plate towards
the back of the dishwasher with a space
between each plate to allow water to pass
freely.
It is advisable to load large plates (approx.

26 or more cm) slightly tilted towards the rear
to facilitate introduction of the basket into the
machine.
Salad bowls and plastic bowls may also

be loaded on the upper basket. It is
advisable to block these in place so that
the jets of water do not make them
overturn.
 The upper basket has been designed to
offer maximum flexibility in use and can
be loaded with up to 24 plates on two
rows, up to 30 glasses on five rows or a
mixed load.
A standard daily load is represented in figs. 1
and 2.
Upper basket (fig. 1)
Upper basket (fig. 2)
Using the lower basket
Saucepans, oven dishes, tureens, salad

bowls, lids, serving dishes, dinner plates
and soup plates can be loaded into the
lower basket.
89