Candy CS M E Serie Manuel page 70

KEY LOCK
Pressing simultaneously

TEMPERATURE SELECTION and SPIN
SELECTION for about 3 seconds, the
machine allows you to lock the keys. In
this way, you
accidental or unwanted changes if a
button on the
accidently during a cycle.
The key lock can be simply cancelled by

pressing the two buttons simultaneously
again or turning off the appliance.
Digital Display
The display's indicator system allows you to
be constantly informed about the status of
the machine.
1) DOOR LOCKED INDICATOR LIGHT
The indicator light is illuminated when the

door is fully closed.
Close the door BEFORE selecting the
START/PAUSE button.
When START/PAUSE

the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door in
the proper way
START/PAUSE button.
the buttons
can avoid making
display is pressed
is pressed on
and press the
Wait until the DOOR LOCKED light has

gone out before opening the door.
2) SPIN SPEED
This show the spin speed of the selected
programme that can be changed or omitted
by the relevant button.
3) WASH TEMPERATURE INDICATOR
LIGHTS
This shows the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button.
If you want carry out a cold wash all the
indicators must be off.
4) CYCLE DURATION
When a programme is selected the

display automatically shows the cycle
duration, which can vary, depending on
the options selected.
Once the programme has started you will

be kept informed constantly of the time
remaining to the end of the wash.
The appliance calculates the time to the

end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
5) STAIN LEVEL INDICATORS LIGHTS
Once the programme has been selected,

the indicator light will automatically show
the stain level set for that programme.
Selecting a different stain level the

relevant indicator will light up.
6) OPTIONS INDICATOR LIGHTS
The indicator lights show the option that
can be selected by the relevant button.
70