Bosch BCS210 Notice D'utilisation page 12

English – 10
Start-up
Connecting the charger to the mains
(2)
Note the household voltage! The voltage of the
u
power supply must correspond to the specifica-
tions given on the battery charger nameplate.
Plug the device connector (3) of the power cable into
the device socket (2) on the charger.
Connect the power cable (country-specific) to the
mains.
Use only the supplied input connection: standard AC
power cord ((3) in the diagram) when connecting to
the household electrical supply.
Charging the eBike battery when removed
(11)
(6)
(5)
(6)
(5) Charging connector
(6) Socket for charging connector
0 275 U07 XCX | (14.03.2024)
Operation
(2)
(3)
(9)
(10)
(8)
(8) Rack-mounted battery
(9) Operation/state of charge indicator
(10) On/off button for eBike battery
(11) Standard battery
Switch the eBike battery off and remove it from its
holder on the eBike. When doing so, read and ob-
serve the operating instructions of the eBike battery.
Ensure the eBike battery is placed on clean sur-
u
faces only. Avoid getting moisture and dirt, e.g.
sand or soil, in the charging socket and contacts.
Plug the charging connector (5) of the charger into
the charging socket (6) on the eBike battery.
Ensure the charger's input plug and battery con-
u
nector plug are both fully inserted into the elec-
trical outlet and the battery's charge port.
Charging the eBike battery when inserted in the
eBike
(7)
(5)
(5) Charging connector
(6) Socket for charging connector
(7) Charging socket cover
(11) Standard battery
(11)
(6)
Bosch eBike Systems