Special Tools Safety Warnings - B+BTec Diamond3 3510RS Manuel D'utilisation

GB DIAMOND3
fied by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk
of injury and fire.
c) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a
fire.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
specIAl tools sAfety
wArnIngs
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are
strictly followed. Before using for
the first time, ask for a practical
demonstration.
3510/15RS - 4015RS
®
1. The sawing machine is only to be used
for sawing tiles, concrete products and
natural stone.
2. Only saw blades advised by the manu-
facturer should be used.
3. Check the following before you start
sawing:
• the machine should be positioned on a
stable, flat and horizontal base,
• the saw blade must be correctly
mounted, (direction of rotation and
centred correctly)
• the condition of the saw blade,
• correct fixing of the saw cover,
• sufficient supply of clean cooling
water.
4. During sawing the material to be cut
should not be tilted or moved.
5. During sawing with this sawing
machine the max. sound pressure level
is exceeded.
Because the max. sound pressure level
is exceeded during operation wearing
hearing protection is mandatory.
6. The safety label on the machine should
never be removed.
7. In addition to the above mentioned
safety regulations the user should pay
attention to the following items:
• Read the instructions for setting up and
using the machine carefully.
• Check that the power cord is correctly
connected to the power supply.
• Electrical cables may not come in con-
tact with water or spray water.
• Damaged saw blades should be
replaced immediately.
14
Before working on the machine
itself, pull the mains plug.
Wear ear protectors and safety
glasses.