FIT BIKE Race 8 Instruction Utilisateur page 12

Race
English
User instructions
MODE/RESET
SET
DISPLAY
TIME
SPEED (SPD)
DISTANCE (DIST)
RPM
TOTAL DISTANCE (ODO)
CALORIES (CAL)
General usage:
With the mode button you can navigate through the different information displays.
1.
Press and hold the push button to do an entire RESET.
2.
When SCAN is displayed on the screen, the screen will change between the
3.
information displays every 8 seconds.
If the device does not receive a signal for a few minutes, it will switch off and erase
4.
the values automatically (with the exception of the total distance 'ODO').
Adjust resistance
Manual – Spinningbike – FitBike – Race 8 – FFIC011
To navigate through the different information displays.
To set values.
DISPLAY FUNCTION
00:00 – 99:59
Current training time
00.00 – 99.99
Current speed
0000 – 9999
Current distance
0000 – 9999
Current rotations per minute
0000 – 9999
Total distance covered on the device
0000 – 9999
Current burned calories
8
Emergency stop / Brake
12