Airthings RENEW Mode D'emploi page 5

WARNING – To avoid product damage or
personal injury
• To avoid fire hazards or electric shock, do not cut, remove, or bypass any
prong from the power cord.
• In the event of a malfunction (sparks, burning smell, etc.), immediately
stop the operation and disconnect the power cord. Contact Airthings
customer support.
• This appliance can be used in a 100-240V, 50-60 Hz power supply without
any change.
• Do not use an extension cord or an adapter plug.
• Keep the cord away from heated surfaces.
• Do not operate the unit with a damaged cord or plug, or after the air purifier
malfunctions, or has been dropped or damaged in any manner. Contact
Airthings customer support.
• Do not pinch, bend, or knot the power cord. Do not cut or damage the power
cord. If the power cord is damaged. Contact Airthings customer support.
• Ensure that any electrical/electronic equipment is 12 inches (30 cm) away
from the unit.
• Do not stop the unit by unplugging the power cord or turning off the power
at the electrical box.
• If purchased in the US, this appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of shock, this plug is intended to fit
only one way in a polarized outlet. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
CAUTION: DO NOT attempt to defeat this safety feature. To do so could result
in an electric shock hazard.
EN
5