Airthings RENEW Mode D'emploi page 11

Getting the most out of your Renew
Renew is designed to fit easily into your environment and offers a few
different placement options.
However you choose to place Renew in your room, we suggest you consider the
following to get the best performance.
• Only place the unit on a level and stable surface.
• Don't place anything on top of Renew.
• Renew takes air in through the textile cover
and blows it out through the vented surface
next to the control panel. Make sure you
leave at least 8" (20cm) of free space so that
air enters and leaves Renew freely.
• Avoid blocking the flow of air into the
particulate sensor. Leave at least 8" (20cm)
around the opening for the sensor.
• Operate Renew in an enclosed space
to get the quickest results and to
operate efficiently.
Upright
Laid flat
Upright with air
outlet to the side
EN
11