Publicité
Les langues disponibles
Les langues disponibles
Keeping it clean
Before cleaning Renew, it's a good idea to unplug it.
Wipe the outside of the unit with a clean, dry cloth to remove any accumulated
dust and dirt. Never use cleaning liquids to clean Renew - if you must, only use
a lightly damp cloth. Water or moisture should never enter the unit.
The front cover (also a prefilter) should be cleaned using a vacuum at a very
low and gentle speed. Be careful not to push hard on the textile or you risk
damaging it.
The mesh prefilter can be cleaned with water and a small amount of mild dish
soap. If you have a handheld shower attachment, that's the easiest way to do
this. Use a gentle stream of water or submerge the filter and gently move it
back and forth. You must let the mesh prefilter dry completely before putting it
back in. Moisture can increase the risk of mold growing inside the unit.
Filters
Cleaning
Front cover
Mesh prefilter
EN
17
Publicité
