Télécharger Imprimer la page

Makita ADCF201 Manuel Du Propriétaire page 6

Publicité

Les langues disponibles

Les langues disponibles

Installing or removing of battery cartridge (Fig. 5 & 6)
To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into
place. Always insert it all the way until it locks in place with a little click. If you can see the red part on the upper side
of the button, it is not locked completely. Install it fully until the red part can not be seen. If not, it may accidentally fall
out of the tool, causing injury to you or someone around you.
Do not use force when installing the battery cartridge. If the cartridge does not slide in easily, it is not being
inserted correctly.
Indicating the remaining battery capacity (Fig. 7)
(Only for battery cartridges with "B" at the end of the model number.)
Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light
up for few seconds.
Lighted
NOTE:
• Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual
capacity.
Timer setting
The portable fan can set a run time for 1 hour, 2 hours, or 4 hours by the timer switch (5 in Fig. 1-1).
The number underneath the LED shows the remaining hour for turn off.
NOTE:
• The cordless fan may run less time than the time you set when you use the battery cartridge.
Adjustable base
The portable fan base can be set in a variety of positions. To switch base positions, adjust base to desired position.
6
Indicator lamps
Off
Blinking
The battery may have malfunctioned.
Remaining capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the battery.

Publicité

loading

Ce manuel est également adapté pour:

Dcf201