Publicité
Les langues disponibles
Les langues disponibles
RRE 510 A 810 A 1010 A 1310A 1510 A 1810 A
This heater can be used freestanding or wall-mounted.
Free-standing:
1. When used in freestanding position, it must be standing in a vertical position. Do not place the
heater on instable surfaces, such as bed, carpets etc. and do not use the heater on uneven position,
where the heater can tip-over-otherwise there is a risk of fire.
2. Allow ample space around the heater. A safe area to be left free is 15 cm at the sides, and 20 cm at
the front
How to install the feet:
Insert the edges of the bottom of the radiator into the feet support as show in (see below figure 1, fig.1.1 and
form) as below. You will hear a click to indicate that the installation was a success.
ATTENTION: When installing the appliance on its support feet, place it on a surface that supports high
temperatures.
Fig. 1
Model
RRE 510 A
RRE 810 A
RRE 1010 A
RRE 1310 A
RRE 1510 A
RRE 1810 A
WALL MOUNTING:
1. Follow the minimum safety distances for installation.
INSTALLING INSTRUCTIONS
fig.1.1
Feet Position
First feet
Second feet
1
3
1
5
1
6
1
7
1
8
1
10
28
Publicité
