Fimar Forcold 1410TN Mode D'emploi page 4

Safety
Tips
Position on a flat, stable surface.
A seNice agenVqualilied technician should carry out
installation and any repairs il required. Do not remove
any components or seNice panels on this produci.
Consult Locai and National Standards to comply with
the lollowing:
• Heatth and Safety al Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
DO NOT use jeVpressure washers lo clean the
appliance.
DO NOT use the appliance outside.
DO NOT use this appliance to store medicai supplies.
DO NOT use electrical appliances inside the appliance
(e.g. heaters, ice-cream makers etc.)
DO NOT stand or support yourself on the base,
drawers or doors.
DO NOT allow oil or fai lo come into contaci with the
plastic components or door seal. Clean immediately if
contaci occurs.
Botttes thai contain a high percentage of alcohol musi
be sealed and placed vertically in the refrigerator.
Always carry, store and handle the appliance in a
vertical position and move by holding the base of the
appliance.
Always switch off and disconnect the power supply to
the un� before cleaning.
Keep alt packaging away from children. Dispose of the
packaging in accordance with the regulations of locai
authorities.
Il the power cord is damaged, it must be replaced by
an agent or a recommended qualified technician in
i
order to avo d a hazard.
lntroduction
Please take a few moments to carefully read through this
manual. Correct maintenance and operation of this
machine will provide the besi possible performance from
your produci.
Pack Contents
The following is included:
Refrigerator or Freezer
(Double)
Keys x 2
Shelf guides x 6 (Singley X 12 (Double)
Waste water tray
We pride ourself on quality and seNice, ensuring thai at
the time of packaging the contents are supplied fully
functional and free of damage.Should you find any
damage as a result of transit, please contaci your dealer
immediately.
lnstallation
(I) Note: lf the appllance has noi been stored or
moved in an upright position, let it stand upright tor
approxlmately 12 hours before operatlon. lf In doubt
allow the appliance lo stand.
1.Remove the appliance from the packaging. Make
sure thai all protective plastic film and coatings
are thoroughly removed from all surfaces.
•Shelves x 3 (Single)/ x 6
•lnstruction manual
2.Maintain a distance of 20cm (7 inches) between
the unii and walls or other objects far ventilation.
lncrease this distance if the obstacle is a heat
source.
(I) Note: Betore uslng the appllance tor the tirsi time,
clean the shelves and interior with soapy water.
3.Set the brakes on the castors lo keep the
appliance in pos ition OR
Level the appliance by adjusting the screw feet.
Lock/Unlock the Doors
A lock is fitted to the doors to ensure loodstuffs are kept
secure within your appliance.
Use the keys provided to lock/unlock the door