Publicité
Les langues disponibles
Les langues disponibles
IOMM
5.1.2. Table 1 describes the bare-ended signal connections that
can be connected to the charger via this connector.
Table 1 Bare-Ended Signal Connections
Connection
Pin 12
Pin 11
Pin 10
Pin 9
Pin 8
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
The connector can accept up to a 16 AWG wire.
CAUTION
Use only copper wires.
Ampure
Description
PILOT (GREEN) (BAT CON 2)
PILOT RETURN (BLACK) (BAT CON 2)
CANH/DATA (RED) (BAT CON1)
CANL/DIR (WHITE) (BAT CON2)
PILOT (GREEN) (BAT CON 1)
PILOT RETURN (BLACK) (BAT CON 1)
SWA and SWB (DCT pins 6 and 5, respectively) are
for an external pilot interlock connection. These pins, in
order to charge, must be shorted either by a normally
closed external interlock or jumper. A jumper between
these pins is factory installed to ensure that the unit
operates when it reaches a destination.
Negative lead connecting and controlling the 24VDC
WATERING VALVE
Positive lead connecting the 24VDC WATERING
VALVE
Negative lead to the SPARE RELAY
Positive lead to the SPARE RELAY
ProCore Edge 30 North America
33 of 68
5912995 A01
Publicité
