Publicité
Les langues disponibles
Les langues disponibles
ProCore Edge 30 North America
IOMM
4.1.2. Side-to-Side Charger Spacing with Dividers
Place metal panels between chargers for closer spacing (Figure 3).
The minimum charger-to-divider spacing, for standard installations,
is 4 in. (10 cm). At a minimum, the divider dimensions should be 46
in high x 20 in wide (1168.4 mm x 508 mm).
4 in (10 cm)
Figure 3 Side-to-Side Charger Spacing with Dividers
4.1.3 Offset (45-degree Angle) Charger Installation
Chargers may be installed also at an offset 45-degree angle for
higher density installations (Figure 4).
Figure 4 Offset 45-Degree Angle Charger Installation
5912995 A01
Ampure
12 of 68
Publicité
