AMPURE PosiCharge ProCore Edge 30 Manuel D'installation, D'utilisation Et D'entretien page 32

ProCore Edge 30 North America IOMM
5.1.1. Connect the battery communication wires – the CAN bus for
battery BMS, battery monitor, and pilot (interlock) – to the screw
terminal per Table 1 and tighten the terminal screws with 5.31 in-lbs
(0.6 Nm) of torque (Figure 22).
Figure 22 Battery Communication Wires
Connected to the Screw Terminal
5912995 A01 Ampure
32 of 68