Publicité
Les langues disponibles
Les langues disponibles
PROGRAMMED TEMPERATURE
The appliance will start at eco mode after plug-in,
touch the function button to switch to other ironing
temperatures and select your desired temperature to
begin ironing. A "Beep" sound will be heard when the
function button is being touched.
Depending on which temperature setting that you have
selected, the corresponding temperature symbol on the
control panel will be flashing. When the iron is ready for
use, the temperature symbol stops flashing and stays on
steadily.
Important note: The first time you use the iron, the
pump will take a few seconds to generate steam. During
this time, you may hear a "pumping" sound. This is
normal and will occur before the iron is ready to use.
Steam ironing is available for all temperature settings
except 'Dot 1'. You can press and hold the steam trigger
to generate steam for steam ironing. A beep will be heard
when the steam trigger is pressed and the respective
steam indicator for 'Auto Mode', 'Dot 2', 'Dot 3' and 'Max'
will flash, indicating it is generating steam. Release the
steam trigger to stop generating steam.
Adjust the temperature setting of the appliance
by pressing the temp button.
After use, Touch and hold the temp button for 4
seconds to shut off the power. Auto Shut off/shut
off Indicator flashes during this period.
After every use, follow the instructions in "Draining the
water tank".It is recommended to drain the water inside
water tank after use.
14
Publicité
