Publicité
Les langues disponibles
Les langues disponibles
5 ASSEMBLY
Changing the fork offset
–
–
–
Final steps
–
Install the front fender (see owner's Manual).
–
Mount the handlebar cushion.
–
Install the start number plate (see Owner's Manual).
–
Install the front wheel (see owner's manual).
–
Check the wiring harness, cables, and brake and clutch lines for freedom of movement and correct routing.
–
Check steering head bearing play (see Owner's Manual).
–
Remove the motorcycle from the lift stand (see owner's manual).
10
5
Loosen screw
.
Depending on the desired offset
5
Tighten screw
.
Guideline
Screw, steering head
Info
As required, the chassis can then be adjusted to a stiffer setting.
Adjust fork airpump (see Owner's Manual) – incrementally by 0.1 bar more.
Adjust the compression damping of the fork (see Owner's Manual) – 3 to 5 clicks.
A
B
or
turn the stem tube of the triple clamp by 180°.
M20
504076-01
60 Nm (44.3 lbf ft)
Loctite
®
243™
Publicité
