tomado TDW6001B Manuel D'utilisation page 44

Warning:
Do not use the appliance without the filter system.
Note:
Clean filters make sure that your appliance functions correctly.
1. Remove the lower basket.
2. Turn the main filter (A) counter-clockwise to remove it.
Note:
The micro filter and the sieve are attached to the main filter.
3. Remove the micro filter (A) from the filter assembly (B).
4. Turn the main filter (A) counter-clockwise to remove it.
5. Clean the main filter, the micro filter and the sieve. Use warm water and a dishwasing brush.
6. Install the sieve.
7. Install the main filter into the micro filter. Make sure that the markers are aligned.
8. Install the main filter into the sieve.
9. Turn the main filter (A) clockwise to fasten it.
Caution:
Make sure that the filters are placed correctly. Incorrect placement of the filters affects the maximum
performance of the appliance.
CLEANING THE SPRAY ARMS
1. Remove the upper and lower basket.
2. Remove the nut (A).
3. Remove the upper spray arm (B).
4. Pull the lower spray arm (C) upwards to remove it.
5. Clean the spray arms. Use warm water.
6. Install the lower spray arm (C).
7. Install the upper spray arm (B).
8. Tighten the nut (A).
8 Extra information
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
German hardness
Level
[dH]
H1 0-5
H2 6-11
H3 12-17
H4 18-22
H5 23-34
H6 35-50
44
• English
French hardness [dF] British hardness [dE]
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-60 29-42
61-90 43-63
(Figure 22)
(Figure 23)
(Figure 24)
(Figure 25)
(Figure 26)
(Figure 27)
Program selector button on
Quick '30, on
Delicate, on
Delicate and Quick '30, on
Quick '90, on
Quick '90 and Quick '30, on
Quick '90 and Delicate, on