Yeelight A2001 Manuel D'utilisation page 6

EN
Connect to Yeelight App
This product can be controlled on Yeelight App and be configured to interact with other Yeelight products.
Download App
Search for "Yeelight" in an App store or scan the QR code on the right to
download and install the App.
Add Device
・ Go to the Yeelight App homepage, and click "+" in the upper right corner
to add your device.
・ Proceed with the configuration as instructed on the App.
・ Once you've added a device successfully, you can find it in the device list.
Note: The operation procedure may differ from what's described here due to App updates. Please proceed
as instructed on the App.
This product can also be controlled on Mi home, Google Home App, and Amazon Alexa. You can
download and install one of these Apps from an App store, and configure your device as instructed on the
App. After you have finished the configuration, you can use the App to control the light.
Apple HomeKit Smart Control
1. Open the Home app on your iPhone or iPad.
2. Tap "Add Accessories" and follow the instructions to scan the QR code either on
the back cover of the user manual or on the junction box, or enter the 8-digit setup
code above the QR code to grant the Apple Home app access.
Make sure a Wi-Fi network with Internet access is available (this product does not support 5 GHz
*
networks).
To control this HomeKit-compatible accessory, it is recommended that you use iOS 9.0 or above. The
HomeKit setup code is in the user manual and on the junction box, do not lose it. When adding the
product to the Home app after the factory settings are restored, you will need the HomeKit setup code
again.
In case the user manual is lost, remove the lampshade and scan the QR code or enter the setup code
on the junction box.
iPad and iPhone are the trademarks of Apple Inc., and they are registered in the United States and
other countries.
4