Publicité
Les langues disponibles
Les langues disponibles
6. CLEANING AND MAINTENANCE
6.1 Safety instructions
All maintenance, cleaning and repair of the appliance must be done with a disconnected appliance (isolated
from all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not get inside the
device.
Never immerse the device in water or other liquid.
Use Casselin brand products intended for this purpose.
WARNING
The device cannot be cleaned by direct water jet (no pressurized water jet).
6.2 Daily maintenance
- Clean the device after each use.
- Clean the water tank of deposits and coffee residues.
- Wipe the outside of the coffee maker with a damp cloth then dry.
- Cleaning the tap: fill the coffee maker with hot water and empty it through the tap. Disassemble the faucet
and wash it with soap and hot water.
- Clean the hole at the bottom of the appliance with lukewarm water, a descaling agent and a clean cloth.
Weekly cleaning
In the event of daily use of the appliance, the valve mechanism should be thoroughly cleaned once a week.
To do this, unscrew the handle, clean the tap and the connection between the tap and the appliance. Also
clean the faucet handle, then screw it back on.
6.3 Safety instructions for maintaining the device
Daily check for damage to the power cord. Never use the appliance when the cord is damaged. If the cord is
faulty, it must be replaced by a qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair intervention must only be carried out by a professional.
NOTE
In the event of a fault, unplug the appliance, let it cool down and contact your dealer. If the device does not
start, check your power cord. The device should not be plugged into a multiple socket, but directly to a wall
outlet. For any other anomaly, contact your dealer.
NOTE
Waste from used devices: any used device must, when disposing of it, comply with the regulations in force
in its country *. It is essential to make the device unusable before disposal by removing the power supply
cable.
* in terms of ecology and recycling
EN
Publicité
