Mellerware Robot 1000 Inox Mode D'emploi page 6

DESCRIPTION
A Speed control regulator
B Buttons
B1 ON/OFF
B2 Turbo
C Motor Body
D Release buttons
E Stick-blender accessory
F Measuring cup
G Whisk (*)
G1 Adapter whisk
H Chopper cup (*)
H1 Chopper lid
H2 Blades chopper set
(*) Only available in the model Robot 1000 Plus
Inox.
- If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- Prepare the appliance according to the function
you wish to use.
USE:
- Unroll the cable completely before plugging it
in.
- Connect the appliance to the mains.
- The pilot light comes on.
All manuals and user guides at all-guides.com
- Turn the appliance on, by using the on/off
button.
- Select the desired speed.
- Work with the food you want to process.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed regulator control (A). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
TURBO FUNCTION:
- The appliance has a Turbo function. By activa-
ting the Turbo function (B2) all the power of the
motor becomes available, thus obtaining a finer
finish in the final texture of the product.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by releasing the pressure
on the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
ACCESSORIES:
STICK BLENDER ACCESSORY (E):
- This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food ...
- Attach the stick to motor body by pressing until
you hear a click (Fig.1).
- Put the food to be prepared in the measuring
cup and switch the appliance on.
- Detach the stick to motor body by pressing the
release buttons (Fig. 2).
CHOPPING ACCESSORY (H):
- This accessory is used to chop vegetables or
meat...
- Put the blades set and the food to be prepared
in the chopping container. Then, put the lid
firmly.
- Fit the motor unit to the lid by pressing until you
hear a click (Fig.3).
- Switch the appliance on (be careful: do not
switch the appliance on if the whole unit is not
properly fitted and connected together).
- Stop the appliance when the food reaches the
desired texture.