Costway JB10006 Mode D'emploi page 7

INSTALLATION INSTRUCTION
1
Install pump to the base
Set screw
Pump Foot bar
Base
6 Black bolts
Step 1:Install the pump to the base with the 6 black bolts.
Step 2: Place assembled Base & Pump on floor. Use Allen Wrench
to loosen the screws in the crossbar. See the photo. Insert Foot Bar
into the holes of the crossbar. (May require slightly squeezing ends
of Foot Bar towards each other, and some maneuvering for the bar
ends to go into place.)
Step 3. Tighten the 2 set screws to firmly hold the Foot Bar in place.
07