Publicité
Les langues disponibles
Les langues disponibles
Menu Item
Description
REAR-SP
Select when there is a full-range speaker connected to the rear
speaker output leads.
[FUL]
[SW]
Select when there is a subwoofer connected directly to the rear
speaker output leads without any auxiliary amplifier.
SYSTEM UPDATE
Select [SYSTEM INFO] to confirm the latest system information
on the unit.
[SYSTEM INFO], [S/
Select [S/W UPDATE] to update the unit to the latest software
W UPDATE]
and initialize the unit settings. For details on the latest software
and updating, visit our website.
SXM RESET
Select to initialize the SiriusXM settings.
[YES], [CANCEL]
SYSTEM RESET
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
[YES], [CANCEL]
(Some of the settings may be retained even after resetting the
unit.)
Radio
The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
Receiving preset stations
1
Press SRC/OFF to select [RADIO].
2
Press BAND/
to select the band from [FM1], [FM2], [FM3] or [AM].
3
Press a number button (1/
NOTE
You can select a preset channel by pressing
TIP
The
/
buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 16).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/
6
En
to 6/
).
and turning the M.C. dial.
to 6/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
Press and hold
when the unit receives a station. To cancel seek tuning, press
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 16).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/
NOTE
You can select a preset channel by pressing
press and hold the M.C. dial to store a station.
USB/iPod/AUX
Playing back
Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)/iPod
1
Open the USB port cover.
2
Plug in the USB device/iPod using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device/iPod is connected to the unit, set [USB
AUTO] to [ON] in the SYSTEM settings (page 20).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected
directly to the unit will protrude out from the unit, which could be dangerous.
).
/
to select a station.
/
then release to seek an available station. Scanning stops
to 6/
) until it stops flashing.
and turning the M.C. dial. After selecting a channel,
/
.
Publicité
