Publicité
Les langues disponibles
Les langues disponibles
GB
DO NOT ADJUST THE MAX PRESSURE
LIMITING SCREW (14) IN FIG. 5!
Max pressure was set before the log splitter ex work and the max pressure
limiting screw is tightened to ensure the log splitter works under pressure
no more than 5 tons. The setting was done by qualified mechanic with
professional instruments.
Unauthorized resetting will cause the hydraulic pump fail to output enough
splitting pressure or RESULT IN SERIOUS INJURY AS WELL AS DAMAGE
TO THE MACHINE.
The max pressure limiting screw is protected by a plastic cap (15) as shown
in Fig. 5, and never to loose and adjust it.
Fig. 5
This log splitter is equipped with "ZHB" control system that requires to be
operated by both hands of the user – left hand controls the hydraulic control lever
while right hand controls the pushbutton switch as shown in Fig. 6. The log splitter
will freeze upon absence of either hand. Only after both hands release the
controls, the log pusher starts to return backward to the starting position.
Never force the log splitter for more than 5 seconds by keeping pressure on
it to split excessively hard wood.
Fig .6
After this time interval, the oil under pressure will be overheated and the machine
could be damaged. For such extremely hard log, rotate it by 90
to see whether it
0
can be split in a different direction. In any case, if you are not able to split the log,
this means that its hardness exceeds the capacity of the machine and thus that
log should be discarded to protect the log splitter.
NOTE: During operation, the metal part connected to the motor remains cold or in
11
Publicité
