GYS SPACE 11 TRUE COLOR Notice Originale page 7

Translation of the original instructions
The welding mask must be moved carefully to avoid damage to the
filter, guards and/or protective shell.
Maintenance :
- Do not place heavy objects or tools on or in the facepiece to
avoid damage to the filter or face shields.
Mask storage temperatures range from -10°C to +60°C.
- Clean the Optoelectronic Filter with a clean cotton or special
lens cloth.
- Regularly clean and change the guard screens.
- Clean the inside and outside of the mask with a neutral
detergent-disinfectant. Do not use solvents.
- Make sure that the sensors and cell are not obstructed by dust or
debris.
- We recommend using the mask and visors for 5 years. The length
of use depends on various factors such as type of use, cleaning,
storage and maintenance.
BEFORE WELDING
-Check that the welding helmet is in good condition and headband adjustment.
-Check whether the front cover lens, the front frame and filter are inserted and fixed in place. In case of anomalie, please proceed to
its reconditionning.
-Make sure that the sensors (4) and the cell (2) are not obstructed by dust or debris.
-Make sure that the protection films on both screens are removed.
-Check that the protection level matches your welding processes. Please refer to the following chart to help your choice (cf. welding
process board)
OPERATION
The SPACE 11 TRUE COLOR auto-darkening welding helmet switches from light to dark state when a welding arc is struck. The auto-
darkening welding helmet switches back to the light state when the arc stops.
1
PRECAUTIONS
• The welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding, laser welding and gas
welding.
• Standard protective screens must be installed on both inside and outside surfaces of the module. Failure to use protective screens
may constitute a safety hazard or result in irreparable damage to the module.
SPACE 11 TRUE COLOR
2
1. protection plate
4
2. Solar cell
3. Filter
3
4. Sensors
Clear shade 3
Dark shade 11
Filter dimension 110 x 90 x 8 mm
Reaction speed
0,5 ms
Power supply
Solar
Weight
548 gr
Field of vision 100 x 49 mm + 2x (67x75mm)
Applications MMA 10>150 / TIG 10>175 / MIG-MAG 10>200
Warranty 2 years
Application temperature -5°C / + 55°C
Storage temperature -10°C / + 60°C
7
EN