Philips SCM4380/10 Mode D'emploi page 4

SCM4380 12-09-2007
5 Operation
Charging devices - preparation
Check the maximum input voltage (V DC) of the
1
device you wish to connect. For this see the user
manual that came with the device.
Make sure the device does not consume more current
2
(mA) than 450 mA.
Check what connector tip is required for your device.
3
See the compatibility sheet for the proper tip for your
device.
Charging 5V devices (fig. B)
1 Insert the USB tip of the USB cable into the
USB port (2).
Connect the connector tip to the USB cable.
2
Insert the power tip into the cigarette lighter jack in
3
your car.
> The LED indicator lights up when a device is
charging.
> The LED indicator will flash when the device is fully
charged.
Disconnect the device from the USB car adapter.
4
Disconnect the USB adapter from the cigarette lighter
5
jack.
6 Technical specifications
• Rated input: 10.8V - 24V DC
• Rated output: 5.6V DC, max. 450 mA
• Operating temperature: 0ºC - 45ºC
• Size: 91.7 x 32.7 x 32.7 mm (h x w x d)
• Weight: 30 g
All manuals and user guides at all-guides.com
12:42 Pagina 4
7 Troubleshooting
Problem
– Possible cause
• Solution
USB car adapter does not charge connected device
– Voltage of device does not correspond with that of the
USB car adapter.
• Refer to the user manual that came with the device.
– Improper connection between device and USB car adapter.
• Make sure that the USB cable is properly inserted into
the device and the USB car adapter.
– Improper connection between USB car adapter and cigarette
lighter jack.
• Check that power tip is properly inserted into the
cigarette lighter jack.
– Damaged USB cable or connector tip.
• Replace USB cable and/or connector tip.
– Wrong connector tip used.
• Check connector tip and replace if necessary.
– Non supplied USB cable/connector tip used.
• Replace with supplied USB cable/connector tip.
– Problems with electrical circuit of USB car adapter.
• Take the USB car adapter to your local distributor.
8 Maintenance
• Use a soft, lint-free cloth to clean the USB car adapter
exterior. Do not use harsh chemicals, cleaning solvents
or strong detergents.
• When any problems occur with the USB car adapter or
the accessories, take the adapter and accessories to your
local distributor.
9 Need help?
Online help: www.philips.com/welcome
For interactive help and frequently asked questions.
4