Velleman VTUSCT6 Mode D'emploi page 5

Soft jewellery:
pearls, emerald, ivory, coral, agate, sea turtle shells,
etc.
Welded, plated, glued items
Watches:
unless diving watches with a depth rating over 50 m
(150 ft)
Other:
wood, glass, ceramic, camera filters with known cracks
4. Features
 for cleaning jewellery, dentures, eyeglasses, electric shaver heads, CDs/VCDs/DVDs, etc.
 3 colour LED display
1 to 30 minute timer
o
5 temperature settings
o
working status indicators
o
 cooling fan
 three ceramic heaters
 overheating protection
 three industrial grade ultrasonic transducers
 drainage valve
5. Overview
Refer to the illustrations on page 2 of this manual.
General Overview
A lid
B handles
C stainless steel tank
D housing
E control panel
Control Panel
1. Overheat(R) – Ready
Green – ready: normal working status.
Red – overheating: let the ultrasonic cleaner cool down for at least 20 minutes before resuming.
2. Heater
Press to turn the heater on or off. See 11. heater status indicator.
The heater will turn off automatically when the water reaches the set temperature.
3. Function
Press to select, to start or to interrupt the degassing function (max. 90 seconds).
See 9. degas status indicator and the note below.
4. On/Off
Press to switch the ultrasonic cleaner on or off, and to start the cleaning process. The cleaner
will automatically stop when the counter reaches 00:00.
5. – cleaning time
Counts down after the cleaning process is started.
V. 001 – 19/06/2014
VTUSCT6
ITEMS NOT SUITABLE FOR ULTRASONIC CLEANING
As these items are soft, scratching may occur during
the cleaning process.
Ultrasonic cleaning may increase the gaps inside
welded joints, plated coating or glue which may lead to
breaking loose.
The strong penetration capabilities of the ultrasonic
waves may cause water to penetrate weaker sealed
watches.
Crack size may be increased by the ultrasonic waves.
F drainage valve
G fitting for drainage tube
H lid holders
I power socket
J power switch
5 ©Velleman nv