habitat et jardin 1536 128810 Mode D'emploi page 11

Ceiling mounted installation
The heater must be installed at least
Attention: cable should not pass thought the heater
OPERATING
Product Key Function:
1. Turn on the power, the product is standby mode display (- -);
2. Press key function: press the button, then press the heat levels (L1-L2-L3-L4- standby - off)
Remote Control Instructions
1. POWER BUTTON: Turn the heater off.
2. UP BUTTON: Increase timer and level.
3. DOWN BUTTON: Decrease timer and level.
4. LEVEL BUTTON: Use to adjust the heat levels(L1-L4). Press the Level
button then use the up and down buttons (buttons 2 and 3) to increase or
decrease the heating level.
2.4M
above the floor grade