Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Contents of Carton
1 - Inflator equipped with hose and
universal valve adapter
1 - Accessories Kit
1-
Inflator Needle
1 - Extension Nozzle
1 - High Flow Inflator/Deflator
adapter body with three
nozzles and seal ring
HOW TO SET UP YOUR
UNIT
Location of the inflator
Locate the inflator in a clean, dry and
well ventilated area. The inflator
pump and housing are designed to
allow for proper cooling. The
ventilation openings on the inflator
are necessary to maintain proper
operating temperature. Do not place
rags or other containers on or near
these openings.
GROUNDING INSTRUCTIONS
Risk of Electrical
Shock. In the
event of a short circuit, grounding
reduces the risk of shock by
providing an escape wire for the
electric current. This inflator must
be properly grounded.
The inflator is equipped with a cord
having a grounding wire with an
appropriate grounding plug (see
following illustrations). The plug must
be used with an outlet that has been
installed and grounded in accordance
with all local codes and ordinances.
ASSEMBLY
To Remove Inflator from Carton
1.
Grasp handle and lift the inflator
out of the carton.
2.
Remove all packaging from
inflator and discard.
INSTALLATION
1.
The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used
must be installed and grounded in
accordance with all local codes and
ordinances.
2.
Make sure the outlet being used
has the same configuration as
the grounded plug. DO NOT
USE AN ADAPTER. See
illustration.
Plug
Grounding Pin
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
4.
If these grounding instructions
are not completely understood,
or if in doubt as to whether the
inflator is properly grounded,
have the installation checked by
a qualified electrician.
9- ENG
Grounded
Outlets
D29496
Publicité
