All manuals and user guides at all-guides.com
How to Inflate Tires
1.
Place the universal valve adapter
over tire valve stem.
2.
Press lever on universal valve
adapter down to lock in place.
Risk of Flying
Objects/Bursting
Objects. Over inflating tire could
cause the tire to burst or the
universal valve adapter to pop off
the valve stem and become a
projectile. Use a tire pressure
gauge to ensure an accurate tire
pressure reading, because the
pressure gauge on the unit is for
general reference only.
3.
See "How to Start" instructions
to start inflator.
How to Inflate Sport Balls
Risk of Bursting.
Most sports balls
with no initial air will fill in less than
10 seconds. Watch sport balls
carefully while filling, do not
overfill.
1.
Place inflator needle into the
universal valve adapter and press
lever on universal valve adapter
down to lock in place.
2.
Insert inflator needle into sport
ball to be inflated.
3.
Place On/Off switch in the "ON"
position. When sport ball is firm
place On/Off switch in the "OFF"
position. IMPORTANT: Most
sports balls with no initial air
will fill in less than 10 seconds.
How to Use Your Unit
How to Stop:
1.
Set the On/Off switch to "OFF".
On/Off
Switch
Before Starting:
1.
Place On/Off switch to "OFF".
2.
Attach inflation needle, extension
nozzle, or high flow
inflator/deflator adapter body to
universal valve adapter.
3.
Insert inflation needle, extension
nozzle, or high flow
inflator/deflator adapter body with
desired nozzle into inflatable.
pressure causes a hazardous risk
of bursting. Check the
manufacturer's maximum pressure
rating for objects being inflated.
Carefully follow the "How to Start"
instructions.
How to Start:
1.
Place On/Off switch to "OFF".
2.
Plug the power cord into the
grounded outlet.
NOTE: Before turning the inflator on
know the desired pressure (measured
in PSI).
3.
Place On/Off switch to "ON" to
start inflator. If using the pressure
gauge watch it closely and when
it reaches the desired pressure
place the on/off switch in the
"OFF" position.
IMPORTANT: Watch inflatable
carefully while filling; do not overfill.
NOTE: The pressure gauge on the
unit is for general reference only.
13- ENG
Risk of Bursting.
Too much air
D29496