Wiesenfield WIE-FS-220HAT Manuel D'utilisation page 76

Blade Replacement for hammer blades
1. Remove nut(#1), bolt (#3).
2. Remove existing blades (#2) and reinstall new blade.
3. Install blade with existing bolt, washers, and locknut .
4. Tighten locknut with correct torque.
Blade Replacement for Y type blades
1. Remove nut(#4), bolt (#1), and washers (#2).
2. Remove existing blades (#3) or turn existing pair of blade around 180 degrees
and reinstall.
3. Install blade with existing bolt, washers, and locknut .
4. Tighten locknut with correct torque.
3.4. Maintenance & Lubrication
Storage
It is good practice to clean off any dirt and grease that may have accumulated on
the Mowers and to inspect and make necessary repairs before parking the unit at
the end of the working season and for long periods. This will help ensure that the
Mowers will be ready for use the next time you hook-up to it.
! DANGER
Always disconnect main driveline from tractor PTO and secure Mowers in the up
position with solid supports before servicing underside of the Mowers .