MSW -DEH4050H Manuel D'utilisation page 25

AUTO button
In-dry button
Digital display
3.2.2. Settings
Mode of operation
A. Operation in the AUTO mode
Press the POWER button to turn on the device. Then press the AUTO button and the
display will show the AU message.
The unit starts dehumidifying in the AUTO mode, regardless of the humidity. In this
mode, you cannot set the humidity level or the timer. In this mode, the humidity is set
on 50%.
B. Normal operation
Press the POWER button to turn on the device.
Humidity setting (setting range: 10% -95%):
The humidity can be adjusted in the normal operating mode.
Press the ADD/MINUS button several times to adjust the humidity setting.
Set the humidity level between 40% and 60% for comfort.
The device will turn on and off to maintain this level.
Timer setting (1-24 hours):
Press the SET button to set the timer.
Setting the switch-off time while the device is turned on:
Press the SET button to activate the timer function.
•
Press the ADD/MINUS buttons accordingly to set the switch-off time.
•
Setting the switch-on time while the device is switched off:
• Press the SET button to activate the timer function.
• Press the ADD/MINUS buttons respectively to set the time to turn on the unit.
When the AUTO dehumidification mode is on, you can press the
ADD, MINUS and SET button, but you cannot change the
humidity data and set the ON/OFF timer.
After turning off the device, press this button and the device
will dry inside.
Displays the current humidity (20-95%) and the humidity
setting (10-95%).
Displays the timer setting and temperature.
EN