Publicité
Les langues disponibles
Les langues disponibles
n) Do not block the ventilation openings of the unit!
o) Do not store heavy, poisonous or corrosive objects inside the unit.
p) Do not use the device in unheated rooms or places with high air humidity.
q) CAUTION! The unit in its construction contains flammable substances. For this
reason, the unit should be taken to a specialist for disposal at the end of its
service life.
r)
Do not place the device in the vicinity of open fire sources, electric furnaces,
coal stoves, etc., and do not place the device in direct sunlight.
s)
The unit must be connected directly to a wall plug socket; do not use splitters
etc.
t)
Ensure that the power supply to the unit corresponds to that specified on the
identification plate!
u) Do not place heavy objects on the unit.
v) Do not damage the refrigerant circuit.
CAUTION! Although the product has been designed to be safe and has
adequate safeguards and despite the additional safety features provided to
the user, there is still a slight risk of accident or injury when handling the
product. Caution and common sense are advised when using the product.
3. Instructions for use
The device is designed to dehumidify the air in the room, protecting it and the
objects in it from the negative effects of moisture.
The user is responsible for any damage resulting from misuse.
3.1.
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C. Place the unit in a way that
ensures good air circulation. Maintain a minimum clearance of 50 cm from any wall
of the unit. Keep the unit away from any hot surfaces. Always operate the unit on a
level, stable, clean, fireproof and dry surface and out of the reach of children and
persons of impaired mental, sensory and intellectual functions. Place the unit in
such a way that the mains plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
Before using the unit for the first time, disassemble all parts and wash them as well
as the entire unit.
ASSEMBLY OF THE DEVICE
Preparation for operation
EN
Publicité
