Klarstein ALINA 60 SMART Mode D'emploi page 26

EN
26
8. Adjust the height of the inside of the chimney to the desired position, slightly widen
the outdoor fireplace and screw.
Notes on Installation
• Before installing, make sure the place is clean to avoid suction of broken pieces of
wood scraps and dust.
• It can not share the air vent pipe of another device such as a pipe gas, a hose and
a hot air pipe.
• The curvature of the vent pipe should be above 120 °, parallel or above the starting
point and must be connected to the outer wall.
• After installation, make sure that the extractor is level to avoid grease collection at
one end.